Affordable Floor Sanding and Polishing in Melbourne​

                                       A  marvelously polished floor will likely improve the worth of a home and perhaps, breathe a new life into it. Although it may seem easy and straight forward to do it yourself, but floor sanding and polishing can be a really daunting and challenging task. If due processes are not properly followed, expensive mistakes can occur easily. Therefore, it is very important to prepare the floor well before polishing, including thorough sanding of the timber floor. Here are a few tips that can assist first-timers to get it.
 
Important tips for floor sanding and polishing in Melbourne

1. At the start of the procedures for the timber floor processing, it is vital to get rid of the coarseness in the floor, plus any coatings you have used before. You can achieve this making use of a belt sander or drum sander. Floor polishing and sanding involve making use of a variety of sand papers.
2. The roughness of the sandpaper should be measured by grit, therefore, the lower the grit, the coarser the sand paper. Majority of floors will vitally require making use of a sandpaper of 40-grit, upgrading to a smoother 80-grit. If the floor is very coarse, apparently made of recycled or reconditioned timber, it’s recommended to use 24-grit sandpaper or thereabout.
3. The next thing to do make all the areas that cannot be reached by a belt sander smooth by making use of a circular sanding disk of about 18 centimeters in diameter, referred to as floor edger. Though, this polishing machine is regularly not capable of reaching the corners, thus it will be required to use a scraper or triangular sanding machine.
4. Now, the floor is set for coating. It is vital to close the edges with a brush, and then you should use a roller to evening out the coating. The preliminary coating should be applied from the roll tray, while maximally working down the grain.
5. The next thing to do is to employ an orbital sander with a 120 to 150 grit sandpaper to get rid of all the coarseness happening during the coating. Usually, it is required for one to wait for 8 hours at least before you apply 2 coats more.
6. When you are polishing a floor, it is very important to wear a safety gear, plus ear muffs, breathing mask and dust mask. These work to protect the polisher of the floor from breathing in dusts and fumes. In addition, if they’re working with polishes that are solvent-based, they would want to make sure that pilot lights are nowhere in the house, in case the dissolving solvent ignites. Also, it is important to read the products and equipment instructions before beginning floor sanding and polishing.

You can really save money when you sand and polish your floors yourself, but you should also put the cost of tools and equipments into consideration. If you want certain, super results, it is still the best to leave the task to experts.

Call us today on (03) 8592 4725 ​